| www.tccomputers.co.nz https://www.tccomputers.co.nz:443/var/www/forum.tccomputers.co.nz/ |
|
| How-to repair Windows XP, https://www.tccomputers.co.nz:443/var/www/forum.tccomputers.co.nz/viewtopic.php?f=6&t=11 |
Page 1 of 1 |
| Author: | tomo [ Jul 25th, '08, 21:38 ] |
| Post subject: | How-to repair Windows XP, |
Why would I want to reinstall Windows XP? 1) Can't start Windows XP in safe mode. 2) You have problems caused by a recently installed system update (Windows Update, hotfix, Windows XP service pack, or Microsoft Internet Explorer update). 3) Your problems can't be solved with system restore, or you can't access system restore. 4) You've installed a new motherboard, or made other major hardware changes and need to reinstall Windows. Step 1: Rule out hardware issues. Windows Repair will only fix software problems. Hardware issues can also cause boot problems (i.e. bad hard drive, memory, CPU, or power supply). Step 2: Backup. It's always a good idea to backup your important data before making changes to Windows XP. Relax, if you follow these instructions your data will be perfectly safe. Step 3: Boot from your Windows XP CD. Insert the Windows XP CD into your computer's CD-ROM or DVD-ROM drive, and then restart your computer. When the "Press any key to boot from CD" message appears on the screen, press a key to start your computer from the Windows XP CD. Can't boot from your CD? Please see the note at the bottom of this page (Configuring Your Computer to Boot from CD). Step 4: A blue screen will appear and begin loading Windows XP Setup from the CD. Note: RAID/SCSI/Unsupported UDMA users: You will be prompted to "press F6 to install any third party SCSI or RAID drivers". Most users will not have to press F6, but if you are running RAID, SCSI or unsupported UDMA controllers, then you will have to have your controller drivers on a floppy disk. If you are unsure whether you have RAID/SCSI, then simply let the CD load without pressing F6. When completed loading files, you will be presented with the following "Windows Setup" screen, and your first option. Select "To set up Windows XP now, press ENTER". DO NOT select Recovery Console When presented with the licensing agreement press the F8 key to continue Next, Windows Setup will find existing Windows XP installations. You will be asked to repair an existing XP installation, or install a fresh copy of Windows XP. Press "R" If no installations are found, then you will not be given the option to repair. This may happen if the data or partition on your drive is too corrupted. Your almost finished! Windows XP will appear to be installing itself for the first time, but it will retain all of your data and settings. Just follow the prompts, and have your CD-KEY ready if needed. If it gives you the option to SKIP, then Skip, As if you setup a user it will not restore your old Profile Once your Finished you will find the system may not D/L updates. If this happens then get a program called "Dial a Fix" and this will register some DLLs if they're previously been registered http://www.softpedia.com/get/System/Sys ... -fix.shtml Note: If you install a fresh copy, all data on that partition will be lost! |
|
| Page 1 of 1 | All times are UTC + 12 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|